Part Number: 45121
Material: Steel (Bracketing)
Weight (lbs): 2
Part Description: 250 ft3 (7.1 m3) cylinder strap (single cylinder). The cylinder bracketing is designed to rigidly support the installed INERGEN® agent cylinders. The bracketing components are constructed of heavy structural steel. Bracket assemblies are available in modules for two to six cylinders and can also be connected together for any combination over six. Bracketing can be assembled to support single row, double row or back-to-back rows of cylinders. Bracketing components are painted with a red enamel coating. Uprights and back frame assemblies can be bolted or welded together, which ever makes the installation more convenient.

Part Number: 45244
Material: Steel (Bracketing)
Weight (lbs): 2
Part Description: 200 ft3 (5.7 m3) cylinder channel with nuts and bolts. The cylinder bracketing is designed to rigidly support the installed INERGEN® agent cylinders. The bracketing components are constructed of heavy structural steel. Bracket assemblies are available in modules for two to six cylinders and can also be connected together for any combination over six. Bracketing can be assembled to support single row, double row or back-to-back rows of cylinders. Bracketing components are painted with a red enamel coating. Uprights and back frame assemblies can be bolted or welded together, which ever makes the installation more convenient.

Part Number: 45120
Material: Steel (Bracketing)
Weight (lbs): 2
Part Description: 200 ft3 (5.7 m3) cylinder strap (single cylinder). The cylinder bracketing is designed to rigidly support the installed INERGEN® agent cylinders. The bracketing components are constructed of heavy structural steel. Bracket assemblies are available in modules for two to six cylinders and can also be connected together for any combination over six. Bracketing can be assembled to support single row, double row or back-to-back rows of cylinders. Bracketing components are painted with a red enamel coating. Uprights and back frame assemblies can be bolted or welded together, which ever makes the installation more convenient.

Part Number: 416266
Material: Aluminium
Mounting Hole Size: 7/32 in. (56 cm)
Weight (lbs): 0,3
Part Description: The warning plate is available for mounting outside the hazard area to warn the personnel that the space is protected by an INERGEN® system and no one should enter after a discharge without being properly protected. The warning plate is furnished with four mounting holes for ease of installation.

Part Number: 416265
Material: Aluminium
Mounting Hole Size: 1/4 in. (64 cm)
Weight (lbs): 0,3
Part Description: The warning plate is available for mounting inside the hazard area to warn the personnel to vacate the hazard area when the alarm sounds. The warning plate is furnished with four mounting holes for ease of installation. The plate is constructed of aluminum.

Part Number: 41943
Material: Aluminium
Mounting Hole Size: 13/64 in. (52 cm)
Weight (lbs): 0,3
Part Description: The ʻʻRESERVEʼʼ nameplate is available for labeling components and/or remote pull stations to distinguish them from main system components. The nameplate is furnished with four mounting holes for ease of installation.

Part Number: 41942
Material: Aluminium
Mounting Hole Size: 13/64 in. (52 cm)
Weight (lbs): 0,3
Part Description: The ʻʻMAINʼʼ nameplate is available for labeling components and/or remote pull stations to distinguish them from reserve system components. The nameplate is furnished with four mounting holes for ease of installation.

Part Number: 42344
Material: BAKELITE (Switch), Malleable Iron (Housing), Brass (Piston)
Thread Size/Type: 3/4 in. NPT Female (Conduit Inlet), 1/4 in. NPT Female (Pressure Inlet)
Weight (lbs): 8
Part Description: The pressure switch is operated by the INERGEN® agent pressure when the system is discharged. The pressure switch can be used to open or close electrical circuits to either shut down equipment or turn on lights or alarms. The three pole, single throw (3PST) pressure switch is constructed with a gasketed, water tight housing. The switch
may be used for 3 phase wiring requirements. The housing is constructed of malleable iron painted red. A 1/4 in. NPT pressure inlet is used to connect the 1/4 in. pipe from the INERGEN system. The pressure switch can be installed either before or after the pressure reducer in the distribution piping.

Part Number: 43241
Material: Malleable Iron (Housing)
Thread Size/Type: 3/4 in. NPT Female (Conduit Inlet), 1/4 in. NPT Female (Pressure Inlet)
Weight (lbs): 8,3
Part Description: The pressure switch is operated by the INERGEN® agent pressure when the system is discharged. The pressure switch can be used to open or close electrical circuits to either shut down equipment or turn on lights or alarms. The double pole, double throw (DPDT) pressure switch is constructed with an explosion-proof housing suitable for hazardous environments. A 1/4 in. NPT pressure inlet is used to connect the 1/4 in. pipe from the INERGEN system.

Part Number: 437616
Material: Brass (Body), Steel (Grille), Stainless Steel (Screen)
Weight (lbs): 3,8
Part Description: The pressure-operated siren is used to warn personnel of a system discharge. The siren is operated with the nitrogen pressure from the pilot cylinder. The siren will operate at the start of the INERGEN system discharge and will continue through most of the discharge time. A pipe hanger or bracket must be installed within one foot of the siren.