Part Number: 5156
Material: Brass (Pressure Trip)
Thread Size/Type: 1/4 in. NPT Female
Weight (lbs): 1,1
Part Description: The pressure trip is connected to the actuation or discharge line of an INERGEN® system. By either pneumatic or manual actuation, the pressure trip can release spring or weight powered devices to close doors and windows, open fuel dump valves, close fire dampers or close fuel supply valves. The pressure trip is constructed of brass with two 1/4 in. NPT fittings for connection to discharge or actuation lines. The link on the pressure switch is released either pneumatically, by agent discharge pressure; or manually, by use of the pull ring. The link then releases the device which performs the auxiliary functions.

Part Number: 40309
Material: Brass (Body), Bronze (Spring), Neoprene (Seal)
Thread Size/Type: 1/2 in. NPT Female
Weight (lbs): 0,2
Part Description: The header vent plug is used to release low pressure build up that may occur in a closed system utilizing selector valves or check valves. The header vent plug should also be installed on the cylinder sides of the check valves on both main and reserve systems to relieve any pressure that may leak past the check valve and accidentally actuate the reserve system while the main system is discharging.

Part Number: 57445
Material: Ductile Iron (4 in. Selector Valve)
Thread Size/Type: 4 in. Flange American Standard Raised Face
Weight (lbs): 262
Part Description: Selector valves are used to direct the flow of INERGEN® into a single hazard of a multiple hazard system. Selector valves can be manually operated by mounting a lever actuator either directly onto the valve or onto the top of the electric actuator.

Part Number: 57433
Material: Ductile Iron (2 in., 2 1/2 in., 3 in. Selector Valve)
Thread Size/Type: 3 in. Flange American Standard Raised Face
Weight (lbs): 117
Part Description: Selector valves are used to direct the flow of INERGEN® into a single hazard of a multiple hazard system. Selector valves can be manually operated by mounting a lever actuator either directly onto the valve or onto the top of the electric actuator.

Part Number: 427150
Material: Bronze (2 in. Selector Valve-Used for 1 1/4 in., 1 1/2 in. and 2 in. pipe sizes)
Thread Size/Type: 2 in. NPT Female
Weight (lbs): 33,2
Part Description: Selector valves are used to direct the flow of INERGEN® into a single hazard of a multiple hazard system. Selector valves can be manually operated by mounting a
lever actuator either directly onto the valve or onto the top of the electric actuator.

Part Number: 427185
Material: Bronze (1 in. Selector Valve-Used for 1/2 in., 3/4 in. and 1 in. pipe sizes)
Thread Size/Type: 1 in. NPT Female
Weight (lbs): 15,8
Part Description: Selector valves are used to direct the flow of INERGEN® into a single hazard of a multiple hazard system. Selector valves can be manually operated by mounting a
lever actuator either directly onto the valve or onto the top of the electric actuator.

Part Number: 417720
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.

Part Number: 417717
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.

Part Number: 417714
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.

Part Number: 417711
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,5
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.