Part Number: 417057
Material: Brass (Body)
Thread Size: 2 1/2 in. NPT
Weight (lbs): 7,5
Part Description: The pressure reducer/nipple is required to restrict the flow of INERGEN® agent thus reducing the agent pressure downstream of the nipple. The nipple contains an orifice which is drilled to the specific size hole required based on the flow calculation. The pressure reducer/nipple part number and orifice size are stamped on the body hex.

Part Number: 416682
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 5,5
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 2 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system. The 1 1/4 in., 1 1/2 in. and 2 in. orifice unions must be installed per the direction of the flow arrow stamped on the body.

Part Number: 416681
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 3,6
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 1 1/2 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system. The 1 1/4 in., 1 1/2 in. and 2 in. orifice unions must be installed per the direction of the flow arrow stamped on the body.

Part Number: 416680
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 2,8
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 1 1/4 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system. The 1 1/4 in., 1 1/2 in. and 2 in. orifice unions must be installed per the direction of the flow arrow stamped on the body.

Part Number: 416679
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 1,6
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 1 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system.

Part Number: 416678
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 1,3
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 3/4 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system.

Part Number: 416677
Material: Forged Steel (Body), Stainless Steel (Orifice Plate)
Weight (lbs): 0,8
Part Description: The pressure reducer/union is required to restrict the flow of INERGEN® agent thus reducing the agent pressure down stream of the union. The 3000 psi (206.9 bar) NSCWP union contains a stainless steel orifice plate which is drilled to the specific size hole required based on the flow calculation. The orifice plate provides readily visible orifice identification. The size of orifice union is 1/2 in. NPT. All pressure reducer/unions must be installed in the piping with the orifice identification tab on the pressure inlet side of the system.

Part Number: 426864
Material: Forged Steel (Flange), Stainless Steel (Flange Gasket), and Plated Steel Grade 5 (Bolts/Nuts)
Weight (lbs): 46
Part Description: Single mating flanges are available for field assembly to the Ansul selector valves and the Ansul flanged pressure reducers. These single, flanged shipping assemblies are available in threaded, slip-on, and weld neck, in 2 1/2, 3, and 4 in. sizes. Each shipping assembly includes a flange, a stainless steel gasket, 8 bolts, and 8 nuts.

Part Number: 426862
Material: Forged Steel (Flange), Stainless Steel (Flange Gasket), and Plated Steel Grade 5 (Bolts/Nuts)
Weight (lbs): 18
Part Description: Single mating flanges are available for field assembly to the Ansul selector valves and the Ansul flanged pressure reducers. These single, flanged shipping assemblies are available in threaded, slip-on, and weld neck, in 2 1/2, 3, and 4 in. sizes. Each shipping assembly includes a flange, a stainless steel gasket, 8 bolts, and 8 nuts.

Part Number: 426861
Material: Forged Steel (Flange), Stainless Steel (Flange Gasket), and Plated Steel Grade 5 (Bolts/Nuts)
Weight (lbs): 40
Part Description: Single mating flanges are available for field assembly to the Ansul selector valves and the Ansul flanged pressure reducers. These single, flanged shipping assemblies are available in threaded, slip-on, and weld neck, in 2 1/2, 3, and 4 in. sizes. Each shipping assembly includes a flange, a stainless steel gasket, 8 bolts, and 8 nuts.