ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Brass Corner Pulley, Brass Wheel)

Part Number: 45515
Material: Brass (Body), Brass (Wheel)
Thread Size/Type: 3/8 in. NPT
Weight (lbs): 1
Part Description: The corner pulley is required on an INERGEN® system whenever a mechanical release pull cable run involves a change in direction. Corner pulleys are installed as part of the cable housing (pipe or conduit) and provide 90° direction changes with minimal force loss and no induced kinking. This type of corner pulley is made of forged brass and is threaded for 3/8 in. NPT pipe. The brass wheel corner pulley is designed for location inside or outside the protected space.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Brass Corner Pulley, Nylon Wheel)

Part Number: 42678
Material: Brass (Body), Nylon (Wheel)
Thread Size/Type: 3/8 in. NPT
Weight (lbs): 1
Part Description: The corner pulley is required on an INERGEN® system whenever a mechanical release pull cable run involves a change in direction. Corner pulleys are installed as part of the cable housing (pipe or conduit) and provide 90° direction changes with minimal force loss and no induced kinking. This type of corner pulley is made of forged brass and is threaded for 3/8 in. NPT pipe. The nylon wheel corner pulley is designed for location only outside the hazard space.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Aluminium Corner Pulley)

Part Number: 423250
Material: Aluminium (Body), Stainless Steel (Roller)
Thread Size/Type: 1/2 in. (Use with EMT)
Weight (lbs): 0.3
Part Description: The corner pulley is required on an INERGEN® system whenever a mechanical release pull cable run involves a change in direction. Corner pulleys are installed as part of the cable housing (pipe or conduit) and provide 90° direction changes with minimal force loss and no induced kinking. This type is made of die cast aluminum, has a ball bearing roller, and uses compression fittings for 1/2 in. EMT connections.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 150 ft. 1/16 in.)

Part Number: 42113
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 100 ft. 1/16 in.)

Part Number: 42109
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 50 ft. 1/16 in.)

Part Number: 42104
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 0.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 150 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 150 ft. 1/16 in.)

Part Number: 42113
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 150 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 100 ft. 1/16 in.)

Part Number: 42109
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 150 Bar INERGEN Systems (Pull Cable Components – Cable with Swaged End Fitting 50 ft. 1/16 in.)

Part Number: 42104
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 0.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Read More

ANSUL 200 Bar INERGEN Systems (Pull Cable Components – Pair of Mounting Legs for Pull Box SKU 45062)

Part Number: 41542
Weight (lbs): 2
Part Description: A pulley elbow may be attached directly to the back of the pull box, if necessary, to provide immediate changes in pull cable direction. With this option, the pull box can be extended an additional 3 1/2 in. (8.9 cm) from the mounting surface by using support legs attached to the back of the pull box (one set for latched door type, two sets for break glass type).tes forward for use when the glass is broken. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Read More