Part Number: 41527
Material: Brass (Break Glass Window Pull Box)
Weight (lbs): 10
Part Description: The second type has a break glass window and a spring mounted handle which rotates forward for use when the glass is broken. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Part Number: 45062
Material: Brass (Latch Door Pull Box)
Weight (lbs): 2
Part Description: The pull box on an INERGEN® system is used to provide mechanical release of the system from a manually operated remote station. The latched door type has a solid cast brass door which must be opened to reach the pull handle. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Part Number: 32338
Weight (lbs): 0.3
Part Description: Male Straight Connector (7/16-20 x 1/4 in. NPT)

Part Number: 31810
Weight (lbs): 0.1
Part Description: Male Elbow (7/16-20 x 1/4 in. NPT)

Part Number: 32336
Material: Stainless Steel (Stainless Steel Hose)
Thread Size: Female 7/16-20 (both ends)
Weight (lbs): 1
Part Description: The Stainless Steel Actuation Hose, 24 in. (60.9 cm) is used to connect the actuation line flared tees between each agent tank. The hose has the same thread, 7/16-20, as the flared tees. The actuation hose allows flexibility between the rigid actuation piping and the tank valve.

Part Number: 32335
Material: Stainless Steel (Stainless Steel Hose)
Thread Size: Female 7/16-20 (both ends)
Weight (lbs): 0.2
Part Description: The Stainless Steel Actuation Hose, 20 in. (50.8 cm) is used to connect the actuation line flared tees between each agent tank. The hose has the same thread, 7/16-20, as the flared tees. The actuation hose allows flexibility between the rigid actuation piping and the tank valve.

Part Number: 31809
Material: Stainless Steel (Stainless Steel Hose)
Thread Size: Female 7/16-20 (Both ends)
Weight (lbs): 0.2
Part Description: The Stainless Steel Actuation Hose, 16 in. (40.6 cm) is used to connect the actuation line flared tees between each agent tank. The hose has the same thread, 7/16-20, as the flared tees. The actuation hose allows flexibility between the rigid actuation piping and the tank valve.

Part Number: 42514
Part Description: The connecting link is used to connect two lever releases together when two pilot containers are required for actuation. The connecting link can be used on lever releases installed on CV-98
Material: Steel
Weight (lbs): 0.4

Part Number: 430832
Material: Brass (Adaptor)
Weight (lbs): 1
Part Description: The Booster Actuator/Selector Valve Adaptor, Part No.430832, is used to adapt the booster actuator to the 3 and 4 in. selector valves (Part No. 857433 and 857445). The actuator/adaptor is mounted to the selector valve and the booster (Part No. 428949) is threaded to the top of the adaptor. By adapting the booster actuator to the 3 and 4 in. selector valves, the valves can then be actuated by utilizing the electric HF actuator.

Part Number: 42484
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 0.5
Part Description: Lever Release (1 1/4-18 mounting thread) – Mounts directly to pressure actuator on 2 1/2 in., 3 in. and 4 in. selector valves.