Part Number: 42109
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Part Number: 42104
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 0.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Part Number: 42113
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Part Number: 42109
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 1
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Part Number: 42104
Material: Stainless Steel (Cable), Brass (Swaged Fitting)
Weight (lbs): 0.5
Part Description: The 1/16 in. diameter cable is used to attach remote manual pull boxes to cylinder valves, pull equalizers and control boxes. The cable is constructed of stranded, stainless steel wire. The cable is available in lengths of 50, 100, and 150 ft (15.2, 30.5, and 45.7 m). The cable assemblies include a brass swaged end fitting for attaching to the remote pull box.

Part Number: 41542
Weight (lbs): 2
Part Description: A pulley elbow may be attached directly to the back of the pull box, if necessary, to provide immediate changes in pull cable direction. With this option, the pull box can be extended an additional 3 1/2 in. (8.9 cm) from the mounting surface by using support legs attached to the back of the pull box (one set for latched door type, two sets for break glass type).tes forward for use when the glass is broken. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Part Number: 41527
Material: Brass (Break Glass Window Pull Box)
Weight (lbs): 10
Part Description: The second type has a break glass window and a spring mounted handle which rotates forward for use when the glass is broken. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Part Number: 45062
Material: Brass (Latch Door Pull Box)
Weight (lbs): 2
Part Description: The pull box on an INERGEN® system is used to provide mechanical release of the system from a manually operated remote station. The latched door type has a solid cast brass door which must be opened to reach the pull handle. A 3/8 in. female NPT opening is provided at the back of each enclosure for connection of the cable housing.

Part Number: 32338
Weight (lbs): 0.3
Part Description: Male Straight Connector (7/16-20 x 1/4 in. NPT)

Part Number: 31810
Weight (lbs): 0.1
Part Description: Male Elbow (7/16-20 x 1/4 in. NPT)