Part Number: 32525
Weight (lbs): 26
Part Description: The ANSUL AUTOMAN® II-C Releasing Device consists of a metal enclosure which contains a spring-loaded puncture pin release mechanism, an actuation cartridge, electrical circuitry, and an input/output terminal strip for making electrical connections. The ANSUL AUTOMAN II-C releasing device provides automatic pneumatic actuation of the INERGEN® System. When wired to an AUTOPULSE® Control System, it will provide supervised electric detection and release. It also provides manual actuation using the strike button on the release enclosure and with the optional remote manual cable pull station. When an AUTOPULSE Control System is used, manual actuation is accomplished using an electric manual pull station.

Part Number: 31492
Weight (lbs): 26
Part Description: The ANSUL AUTOMAN® II-C Releasing Device consists of a metal enclosure which contains a spring-loaded puncture pin release mechanism, an actuation cartridge, electrical circuitry, and an input/output terminal strip for making electrical connections. The ANSUL AUTOMAN II-C releasing device provides automatic pneumatic actuation of the INERGEN® System. When wired to an AUTOPULSE® Control System, it will provide supervised electric detection and release. It also provides manual actuation using the strike button on the release enclosure and with the optional remote manual cable pull station. When an AUTOPULSE Control System is used, manual actuation is accomplished using an electric manual pull station.

Part Number: 17728
Weight (lbs): 26
Part Description: The ANSUL AUTOMAN® II-C Releasing Device consists of a metal enclosure which contains a spring-loaded puncture pin release mechanism, an actuation cartridge, electrical circuitry, and an input/output terminal strip for making electrical connections. The ANSUL AUTOMAN II-C releasing device provides automatic pneumatic actuation of the INERGEN® System. When wired to an AUTOPULSE® Control System, it will provide supervised electric detection and release. It also provides manual actuation using the strike button on the release enclosure and with the optional remote manual cable pull station. When an AUTOPULSE Control System is used, manual actuation is accomplished using an electric manual pull station.

Part Number: 426181
Material: Brass (Adaptor)
Weight (lbs): 0,5
Part Description: Adaptor Convertor (converts CV-98 pressure tester to CV-90 valve).  The pressure test assembly consists of a calibrated gauge, adaptor, and handwheel. The assembly is attached to the fill port of the INERGEN® valve. As the handwheel is turned in, the fill port is opened and the pressure is read on the gauge. After verifying the pressure in the cylinder, the handwheel is turned out, closing the fill port, and the assembly can be removed. Two pressure tester convertors are also available. These convertors allow a CV-90 pressure test assembly to be used on a CV-98 valve and also a CV-98 pressure test assembly to be used on a CV-90 valve.

Part Number: 423657
Material: Brass (Adaptor)
Weight (lbs): 0,6
Part Description: Adaptor Convertor (converts CV-90 pressure tester to CV-98 valve). The pressure test assembly consists of a calibrated gauge, adaptor, and handwheel. The assembly is attached to the fill port of the INERGEN® valve. As the handwheel is turned in, the fill port is opened and the pressure is read on the gauge. After verifying the pressure in the cylinder, the handwheel is turned out, closing the fill port, and the assembly can be removed. Two pressure tester convertors are also available. These convertors allow a CV-90 pressure test assembly to be used on a CV-98 valve and also a CV-98 pressure test assembly to be used on a CV-90 valve.

Part Number: 423923
Material: Cast Zinc Alloy (Handwheel), Brass (Body), Brass (Adaptor) Stainless Steel Case, Laminated Safety Glass Lens (Gauge)
Weight (lbs): 5
Part Description: The Pressure Test Assembly Part No. 423923 for CV-98 valves, is required to properly perform the semi-annual pressure check per NFPA 2001. The pressure test assembly consists of a calibrated gauge, adaptor, and handwheel. The assembly is attached to the fill port of the INERGEN® valve. As the handwheel is turned in, the fill port is opened and the pressure is read on the gauge. After verifying the pressure in the cylinder, the handwheel is turned out, closing the fill port, and the assembly can be removed. Two pressure tester convertors are also available. These convertors allow a CV-90 pressure test assembly to be used on a CV-98 valve and also a CV-98 pressure test assembly to be used on a CV-90 valve.

Part Number: 73257
Material: Steel (Bracketing)
Weight (lbs): 28
Part Description: Upright, for 425 ft3 (12.0 m3) cylinder (used either for right side, left side, or center (center upright required when connecting seven or more cylinders in a row))

Part Number: 423027
Material: Steel (Bracketing)
Weight (lbs): 15,9
Part Description: Weigh rail support – back to back double row

Part Number: 71684
Material: Steel (Bracketing)
Weight (lbs): 8,5
Part Description: Weigh rail support – back-to-back rows

Part Number: 71682
Material: Steel (Bracketing)
Weight (lbs): 8,6
Part Description: Weight rail support-double row