Part Number: 32336
Part Description: The Stainless Steel Actuation Hose, 24 in. (60.9 cm) is used to connect the actuation line flared tees between each agent tank. The hose has the same thread, 7/16-20, as the flared tees. The actuation hose allows flexibility between the rigid actuation piping and the tank valve.
Material: Stainless Steel (Stainless Steel Hose)
Thread Size: Female 7/16-20 (both ends)
Weight (lbs) : 1

Part Number: 32335
Part Description: The Stainless Steel Actuation Hose, 20 in. (50.8 cm) is used to connect the actuation line flared tees between each agent tank. The hose has the same thread, 7/16-20, as the flared tees. The actuation hose allows flexibility between the rigid actuation piping and the tank valve.
Material: Stainless Steel (Stainless Steel Hose)
Thread Size: Female 7/16-20 (both ends)
Weight (lbs): 0.2

Part Number: 426863
Material: Forged Steel (Flange), Stainless Steel (Flange Gasket), and Plated Steel Grade 5 (Bolts/Nuts)
Weight (lbs): 23
Part Description: Single mating flanges are available for field assembly to the Ansul selector valves and the Ansul flanged pressure reducers. These single, flanged shipping assemblies are available in threaded, slip-on, and weld neck, in 2 1/2, 3, and 4 in. sizes. Each shipping assembly includes a flange, a stainless steel gasket, 8 bolts, and 8 nuts.

Part Number: 42514
Part Description: The connecting link is used to connect two lever releases together when two pilot containers are required for actuation. The connecting link can be used on lever releases installed on CV-98
Material: Steel
Weight (lbs): 0.4

Part Number: 423309
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 1.4
Part Description: Lever Release (1 1/8-18 mounting thread) – Mounts directly to a CV-98 electric actuator. Mounts directly to a CV-98 cylinder valve.

Part Number: 430832
Material: Brass (Adaptor)
Weight (lbs): 1
Part Description: The Booster Actuator/Selector Valve Adaptor, Part No.430832, is used to adapt the booster actuator to the 3 and 4 in. selector valves (Part No. 857433 and 857445). The actuator/adaptor is mounted to the selector valve and the booster (Part No. 428949) is threaded to the top of the adaptor. By adapting the booster actuator to the 3 and 4 in. selector valves, the valves can then be actuated by utilizing the electric HF actuator.

Part Number: 42484
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 0.5
Part Description: Lever Release (1 1/4-18 mounting thread) – Mounts directly to pressure actuator on 2 1/2 in., 3 in. and 4 in. selector valves.

Part Number: 427207
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 1.3
Part Description: Lever Release (1 1/8-18 mounting thread) – Mounts directly to the 1 in. and 2 in. selector valves. Mounts directly to pressure operated stackable actuator for 1 in. and 2 in. selector valves. Actuator has the handle painted red.

Part Number: 428566
Weight (lbs): 2
Part Description: The Pressure-Operated Stackable Actuator (Part No.428566) is necessary when pneumatic actuation is required on any selector valve. This actuator is installed on top of the selector valve and a 1/4 in. pressure line must be attached to the 1/8 in. pressure port on the side of the actuator. The actuator must be manually reset

Part Number: 429847
Weight (lbs): 0.5
Part Description: The Booster Actuator, Part No. 428949 requires resetting after actuation. A Reset Tool, Part No. 429847, is available for this use.