Part Number: 427185
Material: Bronze (1 in. Selector Valve-Used for 1/2 in., 3/4 in. and 1 in. pipe sizes)
Thread Size/Type: 1 in. NPT Female
Weight (lbs): 15,8
Part Description: Selector valves are used to direct the flow of INERGEN® into a single hazard of a multiple hazard system. Selector valves can be manually operated by mounting a
lever actuator either directly onto the valve or onto the top of the electric actuator.
Part Number: 417720
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.
Part Number: 417717
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.
Part Number: 417714
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,8
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.
Part Number: 417711
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,5
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.
Part Number: 417708
Material: Steel (Nozzle Deflector Shield)
Weight (lbs): 0,5
Part Description: The INERGEN® system nozzle deflector shield is used to control the pattern of the discharge of the INERGEN agent. The deflector shield helps keep the agent discharge away from false ceiling tiles and fragile light fixtures, avoiding damage to them. The deflector shields are constructed of steel and painted with a cameo cream colored paint. They are available in five sizes.
Part Number: 426145
Material: Body-Brass (Nozzle)
Weight (lbs): 2,4
Part Description: Discharge nozzles are designed to direct the discharge of INERGEN® agent using the stored pressure from the cylinders. Ten sizes of nozzles are available. The system design specifies the orifice size to be used for proper flow rate and distribution pattern. The nozzle selection depends on the hazard and location to be protected. The 180° nozzle is commonly used when nozzle placement is at the wall. Standard nozzles are constructed of brass. An index mark is stamped on the bottom of the nozzle to indicate the aiming direction.
Part Number: 426144
Material: Body-Brass (Nozzle)
Weight (lbs): 1,3
Part Description: Discharge nozzles are designed to direct the discharge of INERGEN® agent using the stored pressure from the cylinders. Ten sizes of nozzles are available. The system design specifies the orifice size to be used for proper flow rate and distribution pattern. The nozzle selection depends on the hazard and location to be protected. The 180° nozzle is commonly used when nozzle placement is at the wall. Standard nozzles are constructed of brass. An index mark is stamped on the bottom of the nozzle to indicate the aiming direction.
Part Number: 426157
Material: Body-Brass (Nozzle)
Weight (lbs): 0,8
Part Description: Discharge nozzles are designed to direct the discharge of INERGEN® agent using the stored pressure from the cylinders. Ten sizes of nozzles are available. The system design specifies the orifice size to be used for proper flow rate and distribution pattern. The nozzle selection depends on the hazard and location to be protected. The 180° nozzle is commonly used when nozzle placement is at the wall. Standard nozzles are constructed of brass. An index mark is stamped on the bottom of the nozzle to indicate the aiming direction.
Part Number: 426142
Material: Body-Brass (Nozzle)
Weight (lbs): 0,5
Part Description: Discharge nozzles are designed to direct the discharge of INERGEN® agent using the stored pressure from the cylinders. Ten sizes of nozzles are available. The system design specifies the orifice size to be used for proper flow rate and distribution pattern. The nozzle selection depends on the hazard and location to be protected. The 180° nozzle is commonly used when nozzle placement is at the wall. Standard nozzles are constructed of brass. An index mark is stamped on the bottom of the nozzle to indicate the aiming direction.