Part Number: 423309
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 1.4
Part Description: Lever Release (1 1/8-18 mounting thread) – Mounts directly to a CV-98 electric actuator. Mounts directly to a CV-98 cylinder valve.

Part Number: 430832
Material: Brass (Adaptor)
Weight (lbs): 1
Part Description: The Booster Actuator/Selector Valve Adaptor, Part No.430832, is used to adapt the booster actuator to the 3 and 4 in. selector valves (Part No. 857433 and 857445). The actuator/adaptor is mounted to the selector valve and the booster (Part No. 428949) is threaded to the top of the adaptor. By adapting the booster actuator to the 3 and 4 in. selector valves, the valves can then be actuated by utilizing the electric HF actuator.

Part Number: 42484
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 0.5
Part Description: Lever Release (1 1/4-18 mounting thread) – Mounts directly to pressure actuator on 2 1/2 in., 3 in. and 4 in. selector valves.

Part Number: 427207
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 1.3
Part Description: Lever Release (1 1/8-18 mounting thread) – Mounts directly to the 1 in. and 2 in. selector valves. Mounts directly to pressure operated stackable actuator for 1 in. and 2 in. selector valves. Actuator has the handle painted red.

Part Number: 428566
Weight (lbs): 2
Part Description: The Pressure-Operated Stackable Actuator (Part No.428566) is necessary when pneumatic actuation is required on any selector valve. This actuator is installed on top of the selector valve and a 1/4 in. pressure line must be attached to the 1/8 in. pressure port on the side of the actuator. The actuator must be manually reset

Part Number: 429847
Weight (lbs): 0.5
Part Description: The Booster Actuator, Part No. 428949 requires resetting after actuation. A Reset Tool, Part No. 429847, is available for this use.

Part Number: 70846
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)
Weight (lbs): 1.4
Part Description: Lever Release (1 1/4-18 mounting thread) – Mounts directly to an HF electric actuator.
Material: Brass with Stainless Steel Pin (All Manual Cable-pull Actuators)

Part Number: 75433
Weight (lbs): 0.1
Part Description: An arming tool, Part No. 75433, is required to reset the actuator after operation. The actuator contains a standard 1/2 in. threaded female straight connector for electrical conduit hookup.

Part Number: 428949
Part Description: The Booster Actuator, Part No. 428949, is used when electric actuation is required on the selector valve or the CV-98 cylinder valve. The actuator mounts directly to the component and then a HF electric actuator mounts to the top of the booster actuator.
Weight (lbs): 2.6

Part Number: 441870
Part Description: The placement indicator switch 1/2 in. – 14 NPSM is a monitoring device to indicate proper placement of the system electric actuator. The switch mounts directly to the actuator, and is active when the sensor switch is depressed, allowing a small electric current to pass through the end-of-line (EOL) resistor.
Weight (lbs): 0